Copper cable recovery machine production spirit decline reason

1. The output of copper cable recovery machine is directly related to the composition of waste miscellaneous wire material.It is difficult to break the large-diameter waste mixed wire mixed with small-diameter waste mixed wire, so it is necessary to cut the small-diameter waste mixed wire.The clearance is very small and the large diameter waste liquid line should also be disconnected from the small diameter waste liquid line, which will reduce production.

2. Drying and wetting of various filament materials will also affect the output of copper rice Milling Machine.Ordinary copper rice milling machine requires that the waste silk is water-free and needs dry grinding.If there is moisture in the waste wire, flat copper plastic particles will stick to it.At the bottom of the screen, it is also adhered to the screen of the gravity separation bed, resulting in slow cutting speed, slow selection of copper and rice, which directly affects the output of the copper cable recovery machine.

3. The oil content of the waste will also affect the output of the copper rice milling machine.Waste oil has high viscosity and is easy to stick to the bottom.It is not easily crushed and expelled.It is also attached to the sieve mesh of the gravity separation bed.Bad ventilation seriously affects the vibration sorting of air flow and greatly reduces the output of copper rice milling machine.

4. Copper cable recovery machine tool wear will also affect the output.The serious wear of moving blade and fixed blade is also an important factor affecting the output, and the blade needs to be replaced in time.